Shell批量登陆和执行安全基线检查脚本

*本文原创作者:nothing100,本文属FreeBuf原创奖励计划,未经许可禁止转载

前言

由于没有相关自动化安全检查基线设备,为了方便自己工作,写了个shell脚本,批量登陆、执行、提取远程服务器数据。

脚本说明

1.将本目录所有文件都放入到一台自己的本地linux主机同一目录下

2.将服务器IP、普通账号、普通账号密码、root密码依次按以下格式写入到hosts.txt中(注意“~”作为hosts.txt的分隔符):

192.168.1.81~user~123456~nothing

192.168.1.10~user~123456~nothing

192.168.1.11~user~123456~nothing

3.执行sh login.sh,脚本将自动批量上传checklinux.sh到服务器/tmp目录下,并且自动执行和自动上传结果到本地linux主机上

4.最后将服务器上传的脚本和结果自动删除

(注意:本脚本适用于linux系统)

主脚本login.sh(用于批量调用put.exp、sh.exp、get.exp、del.exp无交互脚本)

#!/bin/bash
#version 2.0
#author by 網菔務卐
cat <

checklinux.sh安全检查脚本

#!/bin/bash
#version 2.0
#author by 網菔務卐

cat <> /tmp/${ipadd}_out.txt
else
echo "口令生存周期为${passmax}天,不符合要求,建议设置不大于90天" >> /tmp/${ipadd}_out.txt
fi

if [ $passmin -ge 6 ];then
echo "口令更改最小时间间隔为${passmin}天,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "口令更改最小时间间隔为${passmin}天,不符合要求,建议设置大于等于6天" >> /tmp/${ipadd}_out.txt
fi

if [ $passlen -ge 8 ];then
echo "口令最小长度为${passlen},符合要求" >> /tmp/${ipadd}_out.txt
else
echo "口令最小长度为${passlen},不符合要求,建议设置最小长度大于等于8" >> /tmp/${ipadd}_out.txt
fi

if [ $passage -ge 30 -a $passage -lt $passmax ];then
echo "口令过期警告时间天数为${passage},符合要求" >> /tmp/${ipadd}_out.txt
else
echo "口令过期警告时间天数为${passage},不符合要求,建议设置大于等于30并小于口令生存周期" >> /tmp/${ipadd}_out.txt
fi

echo "***************************"
echo "账号是否会主动注销检查中..."
echo "***************************"
cat /etc/profile | grep TMOUT | awk -F[=] {print $2} 
if [ $? -eq 0 ];then
TMOUT=`cat /etc/profile | grep TMOUT | awk -F[=] {print $2}`
if [ $TMOUT -le 600 -a $TMOUT -ge 10 ];then
echo "账号超时时间${TMOUT}秒,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "账号超时时间${TMOUT}秒,不符合要求,建议设置小于600秒" >> /tmp/${ipadd}_out.txt
fi
else
echo "账号超时不存在自动注销,不符合要求,建议设置小于600秒" >> /tmp/${ipadd}_out.txt 
fi

#grub和lilo密码是否设置检查
cat /etc/grub.conf | grep password 2> /dev/null
if [ $? -eq 0 ];then
echo "已设置grub密码,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "没有设置grub密码,不符合要求,建议设置grub密码" >> /tmp/${ipadd}_out.txt
fi

cat /etc/lilo.conf | grep password 2> /dev/null
if [ $? -eq 0 ];then
echo "已设置lilo密码,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "没有设置lilo密码,不符合要求,建议设置lilo密码" >> /tmp/${ipadd}_out.txt
fi

#查找非root账号UID为0的账号
UIDS=`awk -F[:] NR!=1{print $3} /etc/passwd`
flag=0
for i in $UIDS
do
if [ $i = 0 ];then
echo "存在非root账号的账号UID为0,不符合要求" >> /tmp/${ipadd}_out.txt
else
flag=1
fi
done
if [ $flag = 1 ];then
echo "不存在非root账号的账号UID为0,符合要求" >> /tmp/${ipadd}_out.txt
fi

#检查umask设置
umask1=`cat /etc/profile | grep umask | grep -v ^# | awk {print $2}`
umask2=`cat /etc/csh.cshrc | grep umask | grep -v ^# | awk {print $2}`
umask3=`cat /etc/bashrc | grep umask | grep -v ^# | awk NR!=1{print $2}`
flags=0
for i in $umask1
do
if [ $i = "027" ];then
echo "/etc/profile文件中所设置的umask为${i},符合要求" >> /tmp/${ipadd}_out.txt
else
flags=1
fi
done
if [ $flags = 1 ];then
echo "/etc/profile文件中所所设置的umask为${i},不符合要求,建议设置为027" >> /tmp/${ipadd}_out.txt
fi 


flags=0
for i in $umask2
do
if [ $i = "027" ];then
echo "/etc/csh.cshrc文件中所设置的umask为${i},符合要求" >> /tmp/${ipadd}_out.txt
else
flags=1
fi
done  
if [ $flags = 1 ];then
echo "/etc/csh.cshrc文件中所所设置的umask为${i},不符合要求,建议设置为027" >> /tmp/${ipadd}_out.txt
fi


flags=0
for i in $umask3
do
if [ $i = "027" ];then
echo "/etc/bashrc文件中所设置的umask为${i},符合要求" >> /tmp/${ipadd}_out.txt
else
flags=1
fi
done
if [ $flags = 1 ];then
echo "/etc/bashrc文件中所设置的umask为${i},不符合要求,建议设置为027" >> /tmp/${ipadd}_out.txt
fi




echo "***************************"
echo "检查重要文件权限中..."
echo "***************************"

file1=`ls -l /etc/passwd | awk {print $1}`
file2=`ls -l /etc/shadow | awk {print $1}`
file3=`ls -l /etc/group | awk {print $1}`
file4=`ls -l /etc/securetty | awk {print $1}`
file5=`ls -l /etc/services | awk {print $1}`
file6=`ls -l /etc/xinetd.conf | awk {print $1}`
file7=`ls -l /etc/grub.conf | awk {print $1}`
file8=`ls -l /etc/lilo.conf | awk {print $1}`

if [ $file1 = "-rw-r--r--" ];then
echo "/etc/passwd文件权限为644,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "/etc/passwd文件权限不为644,不符合要求,建议设置权限为644" >> /tmp/${ipadd}_out.txt
fi

if [ $file2 = "-r--------" ];then
echo "/etc/shadow文件权限为400,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "/etc/shadow文件权限不为400,不符合要求,建议设置权限为400" >> /tmp/${ipadd}_out.txt
fi

if [ $file3 = "-rw-r--r--" ];then
echo "/etc/group文件权限为644,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "/etc/group文件权限不为644,不符合要求,建议设置权限为644" >> /tmp/${ipadd}_out.txt
fi

if [ $file4 = "-rw-------" ];then
echo "/etc/security文件权限为600,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "/etc/security文件权限不为600,不符合要求,建议设置权限为600" >> /tmp/${ipadd}_out.txt
fi

if [ $file5 = "-rw-r--r--" ];then
echo "/etc/services文件权限为644,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "/etc/services文件权限不为644,不符合要求,建议设置权限为644" >> /tmp/${ipadd}_out.txt
fi

if [ $file6 = "-rw-------" ];then
echo "/etc/xinetd.conf文件权限为600,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "/etc/xinetd.conf文件权限不为600,不符合要求,建议设置权限为600" >> /tmp/${ipadd}_out.txt
fi

if [ $file7 = "-rw-------" ];then
echo "/etc/grub.conf文件权限为600,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "/etc/grub.conf文件权限不为600,不符合要求,建议设置权限为600" >> /tmp/${ipadd}_out.txt
fi

if [ -f /etc/lilo.conf ];then
if [ $file8 = "-rw-------" ];then
echo "/etc/lilo.conf文件权限为600,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "/etc/lilo.conf文件权限不为600,不符合要求,建议设置权限为600" >> /tmp/${ipadd}_out.txt
fi

else
echo "/etc/lilo.conf文件夹不存在"
fi

cat /etc/security/limits.conf | grep -V ^# | grep core
if [ $? -eq 0 ];then
soft=`cat /etc/security/limits.conf | grep -V ^# | grep core | awk {print $2}`
for i in $soft
do
if [ $i = "soft" ];then
echo "* soft core 0 已经设置" >> /tmp/${ipadd}_out.txt
fi
if [ $i = "hard" ];then
echo "* hard core 0 已经设置" >> /tmp/${ipadd}_out.txt
fi
done
else 
echo "没有设置core,建议在/etc/security/limits.conf中添加* soft core 0和* hard core 0" >> /tmp/${ipadd}_out.txt
fi


echo "***************************"
echo "检查ssh配置文件中..."
echo "***************************"
cat /etc/ssh/sshd_config | grep -v ^# |grep "PermitRootLogin no"
if [ $? -eq 0 ];then
echo "已经设置远程root不能登陆,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "不已经设置远程root不能登陆,不符合要求,建议/etc/ssh/sshd_config添加PermitRootLogin no" >> /tmp/${ipadd}_out.txt
fi

#检查telnet是否开启
telnetd=`cat /etc/xinetd.d/telnet | grep disable | awk {print $3}`
if [ $telnetd = "yes" ];then
echo "检测到telnet服务开启,不符合要求,建议关闭telnet" >> /tmp/${ipadd}_out.txt
fi

Protocol=`cat /etc/ssh/sshd_config | grep -v ^# | grep Protocol | awk {print $2}`
if [ $Protocol = 2 ];then
echo "openssh使用ssh2协议,符合要求" >> /tmp/${ipadd}_out.txt
fi
if [ $Protocol = 1 ];then
echo "openssh使用ssh1协议,不符合要求" >> /tmp/${ipadd}_out.txt
fi

#检查保留历时命令条数
HISTSIZE=`cat /etc/profile|grep HISTSIZE|head -1|awk -F[=] {print $2}`
if [ $HISTSIZE -eq 5 ];then
echo "保留历时命令条数为$HISTSIZE,符合要求" >> /tmp/${ipadd}_out.txt
else
echo "保留历时命令条数为$HISTSIZE,不符合要求,建议/etc/profile的HISTSIZE设置为5" >> /tmp/${ipadd}_out.txt
fi

#检查重要文件的属性
flag=0
for ((x=1;x<=15;x++))
do
apend=`lsattr /etc/passwd | cut -c $x`
if [ $apend = "i" ];then
echo "/etc/passwd文件存在i安全属性" >> /tmp/${ipadd}_out.txt
flag=1
fi
if [ $apend = "a" ];then
echo "/etc/passwd文件存在a安全属性" >> /tmp/${ipadd}_out.txt
flag=1
fi
done
if [ $flag = 0 ];then
echo "/etc/passwd文件不存在相关安全属性,建议使用chattr +i或chattr +a防止/etc/passwd被删除或修改" >> /tmp/${ipadd}_out.txt
fi

flag=0
for ((x=1;x<=15;x++))
do
apend=`lsattr /etc/shadow | cut -c $x`
if [ $apend = "i" ];then
echo "/etc/shadow文件存在i安全属性" >> /tmp/${ipadd}_out.txt
flag=1
fi
if [ $apend = "a" ];then
echo "/etc/shadow文件存在a安全属性" >> /tmp/${ipadd}_out.txt
flag=1
fi
done
if [ $flag = 0 ];then
echo "/etc/shadow文件不存在相关安全属性,建议使用chattr +i或chattr +a防止/etc/shadow被删除或修改" >> /tmp/${ipadd}_out.txt
fi

flag=0
for ((x=1;x<=15;x++))
do
apend=`lsattr /etc/gshadow | cut -c $x`
if [ $apend = "i" ];then
echo "/etc/gshadow文件存在i安全属性" >> /tmp/${ipadd}_out.txt
flag=1
fi
if [ $apend = "a" ];then
echo "/etc/gshadow文件存在a安全属性" >> /tmp/${ipadd}_out.txt
flag=1
fi
done
if [ $flag = 0 ];then
echo "/etc/gshadow文件不存在相关安全属性,建议使用chattr +i或chattr +a防止/etc/gshadow被删除或修改" >> /tmp/${ipadd}_out.txt
fi

flag=0
for ((x=1;x<=15;x++))
do
apend=`lsattr /etc/group | cut -c $x`
if [ $apend = "i" ];then
echo "/etc/group文件存在i安全属性" >> /tmp/${ipadd}_out.txt
flag=1
fi
if [ $apend = "a" ];then
echo "/etc/group文件存在a安全属性" >> /tmp/${ipadd}_out.txt
flag=1
fi
done
if [ $flag = 0 ];then
echo "/etc/group文件不存在相关安全属性,建议使用chattr +i或chattr +a防止/etc/group被删除或修改" >> /tmp/${ipadd}_out.txt
fi


#检查snmp默认团体口令public、private
if [ -f /etc/snmp/snmpd.conf ];then
public=`cat /etc/snmp/snmpd.conf | grep public | grep -v ^# | awk {print $4}`
private=`cat /etc/snmp/snmpd.conf | grep private | grep -v ^# | awk {print $4}`
if [ $public = "public" ];then
echo "发现snmp服务存在默认团体名public,不符合要求" >> /tmp/${ipadd}_out.txt
fi
if [[ $private = "private" ]];then
echo "发现snmp服务存在默认团体名private,不符合要求" >> /tmp/${ipadd}_out.txt
fi
else
echo "snmp服务配置文件不存在,可能没有运行snmp服务" 
fi

#检查主机信任关系
rhosts=`find / -name .rhosts`
rhosts2=`find / -name hosts.equiv`
for i in $rhosts
do
if [ -f $i ];then
echo "找到信任主机关系,请查看${i}文件,请自行判断是否属于正常业务需求,建议删除信任IP" >> /tmp/${ipadd}_out.txt
fi 
done

#检查日志审核功能是否开启
service auditd status
if [ $? = 0 ];then
echo "系统日志审核功能已开启,符合要求" >> /tmp/${ipadd}_out.txt
fi
if [ $? = 3 ];then
echo "系统日志审核功能已关闭,不符合要求,建议service auditd start开启" >> /tmp/${ipadd}_out.txt
fi

#检查磁盘动态空间,是否大于等于80%
space=`df -h | awk -F "[ %]+" NR!=1{print $5}`
for i in $space
do
if [ $i -ge 80 ];then
echo "警告!磁盘存储容量大于80%,建议扩充磁盘容量或者删除垃圾文件" >> /tmp/${ipadd}_out.txt
fi
done

echo "***************************"
echo "***	检查完毕      ***"
echo "***************************"


put.exp上传checklinux.sh脚本到远程服务器/tmp目录下

#!/usr/bin/expect
set ipadd [lindex $argv 0]
set username [lindex $argv 1]
set userpasswd [lindex $argv 2]
set timeout 10
spawn scp checklinux.sh $username@$ipadd:/tmp/
expect {
"yes/no" {send "yesr";exp_continue}
"password" {send "$userpasswdr"}
}
expect eof

sh.exp 批量远程登陆和执行,将结果放到/tmp目录下

#!/usr/bin/expect
set ipaddr [lindex $argv 0]
set username [lindex $argv 1]
set userpasswd [lindex $argv 2]
set rootpasswd [lindex $argv 3]
set timeout 10
spawn ssh $username@$ipaddr
expect {
"yse/no" {send "yesr";exp_continue}
"*password*" {send "$userpasswdr";exp_continue}
"*from*" {send "su - rootr"}
}
expect "Password"
send "$rootpasswdr"
expect "*]#"
send "chmod 777 /tmp/checklinux.shr"
send "sh /tmp/checklinux.shr"
send "exitr"
send "exitr"
interact 

get.exp批量获取远程结果放到本地/tmp目录

#!/usr/bin/expect
set ipadd [lindex $argv 0]
set username [lindex $argv 1]
set userpasswd [lindex $argv 2]
set timeout 10
spawn scp $username@$ipadd:/tmp/*${ipadd}* /tmp/
expect {
"password" {send "$userpasswdr"}
}
expect eof

del.exp批量远程删除上传的脚本和结果

#!/usr/bin/expect
set ipadd [lindex $argv 0]
set username [lindex $argv 1]
set userpasswd [lindex $argv 2]
set rootpasswd [lindex $argv 3]
set timeout 10
spawn ssh $username@$ipadd
expect {
"password" {send "$userpasswdr";exp_continue}
"*from*" {send "su - rootr";exp_continue}
"*assword*" {send "$rootpasswdr";exp_continue}
"*]#" {send "rm -f /tmp/*${ipadd}*.txt /tmp/checklinux.shr"}
}
expect eof

下载链接: http://pan.baidu.com/s/1pLau2fT
密码:ts3z

*本文原创作者:nothing100,本文属FreeBuf原创奖励计划,未经许可禁止转载

  • 版权声明: 本文源自互联网, 于1个月前,由整理发表,共 9077字。
  • 原文链接:点此查看原文